brand Marking and Labeling System Materials with UL recognition are for use by label printers (converters) in fabricating finished printed labels. Printed labels employing these materials require examination of printing and other features not evaluated in the investigation of the materials alone. The standard used to investigate products in this category is UL969 "Marking and Labeling Systems".

The materials are intended for use indoors and outdoors, where exposure to high humidity or only occasional exposure to water can be expected, expect where the individual recognitions indicate otherwise. Materials suitable only for indoor dry location use or for additional exposure conditions such as outdoor use, gasoline splashing, etc. are identified in the individual recognitions.

These materials are suitable for application to smooth, flat surfaces (except where another surface configuration is noted) subjected to the temperatures indicated. Unless otherwise described, (1) the oils referenced in the individual recognitions are lubricating oils, and (2) painted or enameled surfaces are on metal substrates. Pressure sensitive labels indicated as suitable for application to alkyd paint or alkyd enamel are also considered suitable for application to alkyd paint or enamel modified with an amine resin.

Materials which have been found suitable for imprinting by the user are identified in the individual recognitions.


Specification


1. Computer Imprintable Label
2. Silver PET
3. Film Label
4. Paper
5. Protected Graphic Polyester Label


Color / Material

Matte White PET
Trans. PET
Matte.
PVC
Paper
Matte White PET
Trans. PET
Bright Silver PET
Matte. Silver PET


Description of Product:

0L1T removable intact. Affixed to aluminum, maximum temperature 125°C (257° F), minimum temperature -20°C (0° F); alkyd paint and stainless steel, maximum temperature 125°C (257° F); epoxy coated steel, lauan wood and steel, maximum temperature 100°C (212° F), minimum temperature -20°C (0° F); melamine-formaldehyde plastic, maximum temperature 80°C (176° F), minimum temperature -20°C (0° F). Suitable where exposed indoors or outdoors to high humidity or occasional exposure to water.

0LW5 removable intact. Affixed to aluminum, epoxy coated steel, glass, lauan wood, porcelain and steel, maximum temperature 100°C (212° F), minimum temperature -20°C (0° F); melamine-formaldehyde plastic maximum temperature 80°C (176° F), minimum temperature -20°C (0° F). Suitable for indoor dry locations only.

0L01 removable intact. Affixed to alkyd paint, aluminum, glass, stainless steel, maximum temperature 125°C (257° F), minimum temperature -23°C (-10° F); polycarbonate plastic, maximum temperature 125°C (257° F); acrylonitrile butadiene styrene (ABS) plastic, lauan wood, melamine-formaldehyde plastic and polystyrene plastic, maximum temperature 60°C (140° F), minimum temperature -23°C (-10° F). Suitable where exposed indoors to high humidity or occasionally exposed to water.

0L11 removable intact. Affixed to alkyd paint, aluminum, glass and stainless steel, maximum temperature 125°C (257° F), minimum temperature -23°C (-10° F); acrylonitrile butadiene styrene (ABS) plastic, lauan wood, melamine-formaldehyde plastic and polystyrene plastic, maximum temperature 60°C(140° F), minimum temperature -23°C (-10° F). Suitable where exposed indoors to high humidity or occasionally exposed to water.

0L02 & 0L32 removable intact. Affixed to alkyd paint, aluminum, glass and stainless steel, maximum temperature 125°C (257° F), minimum temperature -23°C (-10° F); acrylonitrile butadiene styrene (ABS) plastic, lauan wood, melamine-formaldehyde plastic and polystyrene plastic, maximum temperature 60°C (140° F), minimum temperature -23°C (-10° F). Suitable where exposed indoors to high humidity or occasionally exposed to water.

0LB7 Affixed to alkyd paint, aluminum, glass, and stainless steel, maximum temperature 150°C (302° F), minimum temperature -20°C (0° F). Suitable where exposed indoor to high humidity or occasionally exposed to water.



Pressure-sensitive Laminating Adhesive :

0L50 & 0L55 For bonding aluminum (0.007 in thick) or polycarbonate plastic (0.019 to 0.065 in thick) to ABS plastic, maximum temperature 80°C (176° F), minimum temperature -23°C (-10° F). Suitable where exposed indoors to high humidity or occasionally exposed to water.

The following UL Recongnized Cards are require a separate viewerAdobe® Acrobat ® PDF to display and print. Click here. Acrobat® Reader® is a free program from Adobe Software which displays ".PDF" files. This new file format is quickly becoming an Internet standard for presenting the kind of information in the CATALOGUE IMAGE OUTLINE and catalog pages. The Acrobat Reader 3.0 can run as a "plug-in" to your Netscape or I.E. browser, or as a stand-alone application.

To Main Page	To Previous Page

® is P. Leo & Co., Ltd. trade mark.

® Registered trademark of Underweriters Laboratories, Inc.