FCM COMPOSITE

     FCM® Flexible Composite Materials - NMN Series  

    FCM COMPOSITE PHOTO
    FCM® Flexible Composite materials


      FCM® is an insulating materials NMN obtained by laminating a polyester (Mylar®) film with one sheet or two sheets of Nomex® paper (aromatic/polyamid fibers) based calendared e.g. Nomex® 410, 416 & 464 or un-calendared e.g. Nomex® 411. Our laminating with a thermo-resistant resin ensures the perfect bonding.

      Nomex® 410, 416 & 464 with good mechanical resistance and an excellent resistance to the high temperatures; Polyester film is very resistant to the tearing; the combination of the two materials enables FCM® to get high performances when both mechanical or thermal stress occurs, suitable for Slot Liner,Ground Insulation ,Wedges ,Barrier ,Phase Insulation ,Layer and HVT Coils

      FCM® is produced in several types and thicknesses; the most important our Nomex® laminates containing total thickness of 6 mils and/or 5 mil of Nomex® type N416MN and laminates containing total thickness of 10 mil of Nomex type N411MN are ground and Interwinding Insulation in P.Leo Electrical Insulation System OBJS2, UL File No. E200050 : Class N (200¢J) N86 and Class R (220¢J)R81, R82 and Class S (240¢J) S81, S82 system.

     
     Specification sheet  
     

      N416MN 3&3
      N416MN 3&2
      N411MN 5&5

    		  
     

      NMN also available type Nomex® 464 2 mil (2ply) and Nomex® 416 3 mil or Nomex® 464 2mil (1 ply)
      N464M/N 2&2
      N464M 2&
      N416M 3&

    		  
     

      Nomex/Mica (New item)
      N410Mica high breakdown voltage and good corona resistant. Total thickness 0.4mm are ground and interwinding insulation materials in Class S (240C) S81, S82 system.

    		  


      Other types combination can be made upon request.

       

    		  
     Others Composites Series  


    TP& TK Series, Slot-liner composites are two layer composite flexible sheet materials with high mechanical strength produced by bonding polyester film to Press Board electrical paper using synthetic adhesive. It is a low cost Class B (130¢XC) material which has many advantages over polyester film. The advantage are better varnish absorption and flexibility. (click here for more details)

    DMD Series, DMD is a three layer composite material made of polyester nonwoven fibers laminated on both side of polyester film, we have resin type which impregnated with a high temperature-resistant (200¢XC) resin. This laminate is flexibility and good resin absorption ability can be inserted easily due its slippery surface. Ideal for the production and repair of all types of winding machinery which need to reach high mechanical, dielectric and Class F (155¢XC) standards. It is suitable for electric motor; turbine-wind mill power generator production. (click here for more details)

    		 

Back to Main Page

If you have questions or comments, contact us at market@pleo.com

® is P. Leo & Co., Ltd. registered trade mark.
Mylar®, Nomex®, Kapton® is Du Pont's registered trade mark.
© P.LEO 1996-2008