FCM COMPOSITE

     FCM® Flexible Composite Materials - DMD Series  

    FCM COMPOSITE PHOTO
    FCM® Flexible Composite materials


      GENERAL
      DMD is a three layer composite material made of polyester nonwoven fibers laminated on both side of polyester film, we have resin type which impregnated with a high temperature-resistant (200¢XC) resin. This laminate is flexibility and good resin absorption ability can be inserted easily due its slippery surface. Ideal for the production and repair of all types of winding machinery which need to reach high mechanical, dielectric and Class F (155¢XC) standards. It is suitable for electric motor; turbine-wind mill power generator production.

       

      GENERAL TYPE
      Part No.
      Heat Resistance (¢J)
      Thickness (mm)
      Width (mm)
      Length (m)
      Tensile Strength (kgt/15mm)
      Breakdown     
       Voltage    
       (kv)           
      DMD-222
      155
      0.18
      980
      100
      >13
      > 7
      DMD-252
      155
      0.25
      980
      100
      >20
      >10
      DMD-272
      155
      0.30
      980
      100
      >25
      >12
      DMD-333
      155
      0.25
      980
      100
      >21
      > 9
      DMD-353
      155
      0.30
      980
      100
      >25
      >12
      DMD-373
      155
      0.35
      980
      100
      >30
      >15

       

      RESIN TYPE
      Part No.
      Heat Resistance (¢J)
      Thickness (mm)
      Width (mm)
      Length (m)
      Tensile Strength (kgt/15mm)
      Breakdown    
       Voltage   
       (kv)        
      R-DMD-232
      155
      0.20
      980
      100
      >15
      > 9
      R-DMD-252
      155
      0.25
      980
      100
      >20
      >10
      R-DMD-272
      155
      0.30
      980
      100
      >25
      >12
      R-DMD-2102
      155
      0.37
      980
      100
      >30
      >15
      R-DMD-333
      155
      0.25
      980
      100
      >21
      > 9
      R-DMD-353
      155
      0.30
      980
      100
      >25
      >12

       

    All figure is reference only. It is not guarantee.

     

     Specification sheet  
     


      Click Here for download DMD Series Datasheet

    		  
     

    		 
       

      Other types combination can be made upon request.

    		  

    		 
     Others Composites Series  


    NMN Series, is an insulating materials NMN obtained by laminating a polyester (Mylar®) film with one sheet or two sheets of Nomex® paper (aromatic/polyamid fibers) based calendared e.g. Nomex® 410, 416 & 464 or un-calendared e.g. Nomex® 411. Our laminating with a thermo-resistant resin ensures the perfect bonding. (click here for more details)

    TP& TK Series, Slot-liner composites are two layer composite flexible sheet materials with high mechanical strength produced by bonding polyester film to Press Board electrical paper using synthetic adhesive. It is a low cost Class B (130¢XC) material which has many advantages over polyester film. The advantage are better varnish absorption and flexibility. (click here for more details)

    		 

Back to Main Page

If you have questions or comments, contact us at market@pleo.com

® is P. Leo & Co., Ltd. registered trade mark.
Mylar®, Nomex®, Kapton® is Du Pont's registered trade mark.
© P.LEO 1996-2008