Product Number | Description |
|
Cotton Cloth 1C821 |
Cotton Tape is noted for its conformable wrap as a class 105oC product in electrical application, abrasion resistant, 1C821 backing is absorbent for extra impregnation | |
Acetate Cloth 1A025 |
Black or White acetate cloth coated with flame-retardant adhesive, rough and absorbent surface. It is better suited for varnished impregnation in 130oC application | |
Reinforced Polyester film 1H866*, 1H818*, 1H860*, 1H86A |
Polyester film/mat; excellent electrical properties; tough, conformable; for insulating, anchoring and banding in motor and transformers, good for barrier tape with CTI Group 1 >600V | |
Kapton® Tape (Silicone Adhesive) 1K063*, 1K7170*, 1K7220 |
1 mil Kapton® film, tough, thin, designed for high temperature applications; used on coils, capacitors. 1K063 with temperature rating 220oC application | |
Kapton® CR Tape (Silicone Adhesive) 1K063CR*, 1K1CR* |
1K063CR is made by Corona resistance of Kapton® CR film at a voltage stress of 20KV/mm (500 V/mil)AC at 50Hz has a life endurance in excess 100,000 hr (11 ?years), in comparing to 200 hours for Kapton® HN. Similar substantial improvements in corona resistance and outstanding high temperature retention of physical and electrical properties found with Kapton® CR tape #1K063CR with the flame Retardant meet to UL 510 requirement and temperature rating 220oC and flame retardant. For use in high performance electrical applications, used on high-temperature or high voltage coils. | |
Kapton® Tape (Acrylic Adhesive) 1K7177*, 1K63A*, 1K7178 |
1 mil Kapton film coated with acrylic adhesive with temperature rating 155oC | |
Polyimide Tape (Silicone Adhesive) 1K125* |
1/2 mil (0.0125mm)Polyimide film with silicone adhesive, the total thickness only 0.038mm, temperature rating 220oC used in high performance electrical applications and high-temperature coils | |
Polyimide Tape (Acrylic Adhesive) 1K12A*, 1K125A |
1/2 mil (0.0125mm)Polyimide film with Acrylic adhesive, the total thickness only 0.038mm, temperature rating 180oC used in high performance electrical applications and high-temperature coils | |
Polyimide Tape (Silicone Adhesive) 1K220* |
0.025mm thick Polyimide film coated with Silicone based thermosetting pressure sensitive adhesive. Outstanding high temperature retention of physical and electrical properties. Temperature rating 220oC | |
Polyimide Tape (Silicone Adhesive) |
1K7200 polyimide tape with temperature rating 200oC ; 1KPST, 1K7172, 1KPIH and 1KPIS polyimide tape with temperature rating 180oC | |
Polyimide Tape (Acrylic Adhesive) 1K06A*, 1KLMN, 1K22A*, 1K26A* |
1K06A, 1KLMN, 1K22A and 1K26A polyimide tape coated with acrylic adhesive for use in high performance electrical application, used on high-temperature coils. Temperature rating 180oC. Complies with flame retardant requirements of UL 510 Temperature rating 180oC | |
Glass Cloth Tape 1G130, 1G027 |
With rubber adhesive designed to offer efficiencies in application and versatility in selection. Used as coil wrap, crossover insulation, coil banding. Temperature rating 130oC | |
Glass Cloth Tape 1G155, 1G015 |
With acrylic adhesive designed to offer efficiencies in application and versatility in selection. Used as coil wrap, crossover insulation, coil banding. Temperature rating 155oC | |
Glass Cloth Tape 1G180, 1G220, 1G006, 1G18S, 1G08S |
With silicone adhesive designed to offer efficiencies in application and versatility in selection. Used as coil wrap, crossover insulation, coil banding. Temperature rating 180oC | |
Polyester Tape 1P802,1P130, 1P833 1P830, 1P700 |
1 mil Polyester film with Acrylic adhesive, except 1P700 with rubber adhesive. Operation temperature 130o, 1mil film for use as layer insulation and coil cover | |
Polyester (flame retardant) 1P801, 1P9FR, 1P316, 1P133*, 1PFRS*, 1PFRA* |
1P801, 1P9FR, 1P316, 1P133 are Polyethylene Terephthalate (PET) Tape, coated with acrylic adhesive with UL510 flame retardant. 1PFRS coated with Silicone adhesive and 1PFRA coated Acrylic adhesive both are complies with UL510 flame Retardant requirements, This tape is make by Polyethylene Terephthalate film both side cover with flame retardant layer, total in 3 layers with total thickness 0.06mm meet to UL Flame Class VTM-0, have electrical strength test over 3,000V AC applied on any combination of two layers. Designed for use as a reinforced insulation as specified in UL 60950/IEC 60950 clause 2.9.4.2. Tapes are high dielectric strength, excellent adhesive properties, outstanding heat and Solvent resistant, high tensile and dielectric strength. The design of this flame retardant tapes did not use brominates and/or Chlorinated compound and not contain Cd, Pb, Cr, Hg, PBB, PBDE. meet to RoHs requirement and Halogen free. | |
Filament Reinforced 1PG880, 1PG887 |
Polyester film/glass filament tape, thermosetting rubber adhesive. Excellent solvent resistance and thermosetting qualities agressive high adhesive, non flagging rubber adhesive | |
Polyester Knit and Cloth 1PK825 & 1PN820, 1PN828 |
Flexible, compatible polyester knit, coil wrapping and holding transformer construction, bundling and binding for electrical application | |
Nomex® Tape 1N008*, 1N020*, 1N012*, 1N155*, 1N030* |
Nomex® aramid paper is got the UL 746B-approved long-term thermal resistance indices of 220°C(electrical), enabling its continuous use at extremely high temperatures, #1N008 & 1N020 made by 2 mil Nomex® and 1N012 , 1N030 & 1N155 make by 3 mil Nomex®. Other thickness in 5mil, 7mil, 10mil Nomex® are also available. | |
PEN Tape 1PEN2*, 1PEN3, 1PN2R, 1PN3R |
PEN Film is UL approved 180oC insulation, and the operating temperature 160oC, It is superior in almost all fields of applications. It exhibits higher temperature rating, better dimensional stability after heating, better hydrolytic resistance and excellent oxygen permeability. 1PN2R and 1PN3R with UL510 flame retardant. | |
PTFE Cloth Tape 1TF05, 1TF07, 1TF08 |
Construction is a glass cloth PTFE-coated anti-stick release surface in heat sealing equipment. Anchoring bonding motor and transformers. Temperature rating 180oC | |
PTFE (PTFE) Tape 1TT02 | Construction is a PTFE film tapes and excellent temperature rating. 2 mil film and flame retardant. Temperature rating 180oC | |
"PPS" Polyphenylene Sulfide Tape (Acrylic adhesive) 1PS25*, 1PS2A, 1PPSS*, 1PS2S |
PPS film got the UL 746B-approved long-term thermal resistance indices of 200°C(electrical), enabling its continuous use at extremely high temperatures, It is designed for high temperature application of chop type aluminum foil condenser, insulation of the electrodes of lithium ion secondary battery or high temperature transformers and Inverter transformers for LCD backlighting. #1PS25, #1PS2A coat with Acrylic adhesive with UL temperature rating 155oC and #1PPSS & 1PS2S coat with Silicone adhesive with UL temperature rating 180oC |
[International Distributor]
[Electrical Tape Cross Reference Chart]
[ Technical Data ]
[ Halogen-Free Tape ]
[ CTI ]
The technical information, recommendations and statements contained herein are based on the tests which we belived to be reliable. But the accuracy is not guaranteed.
Other statement or recommendation which is not contained herein shall have no force or effect unless it is in an agreement signed by the officers of the both the seller and the manufacturer.